Hi hier meine inis:
SGPS.INI:
[PosSys]
Sensor1=Default Sensor Gps
Positioner=Default Positioner
MapMatcher=Default MapMatcher
Simulation=Default Simulation
[Default Sensor Gps]
DataType=GPS
Connection=Default Sensor Gps Serial
Parser=Default Sensor Gps Parser
[Default Sensor Gps Serial]
ConnectionType=1
Port=3
BaudRate=4800
TimeOut=5
[Default MapMatcher]
IgnoreOneWay=0
GPSMode=2
[Default Sensor Gps Parser]
AutoDetectEnabled=1
AutoReconnectTimeout=4000
AutoDetectTimeout=-1
ParserFormat1=GGA_VTG
ParserFormat2=GGA_RMC
[GGA_VTG]
Type=NMEA
Name=GPS with GGA and VTG messages
Input1=GPGGA,utctime,latitude,ns,longitude,ew,quality,satellites,hdop,altitude,,,,,
Input2=GPVTG,course,,,,,,speed,
[GGA_RMC]
Type=NMEA
Name=GPS with GGA and RMC messages
Input1=GPGGA,utctime,latitude,ns,longitude,ew,quality,satellites,hdop,altitude,,,,,
Input2=GPRMC,,,,,,,speed,course,utcdate,,,,
speedMultiplier=1.851998
speedOffset=0.0
Prefer=1
[Default Simulation]
Speed=1.000000
Die Usersettings.xml:
<TMC>
<RadioStationScan>0</RadioStationScan>
<AutoRecalculation>0</AutoRecalculation>
<StationName />
</TMC>
<GPS>
<Type>2</Type>
<GPSPort>2</GPSPort>
<TMCPort>1</TMCPort>
<Baudrate>4800</Baudrate>
<DRVPrefix></DRVPrefix>
</GPS>
Trotzdem funkt das TMC nicht was kann ich machen unter GO PAL arbeitet das TMC astrein^^
