Hi
Was kann ich aus der SPGPS.ini beim Yakumo 300 GPSalles rauslöschen damit der Start schneller geht ?
Einstellungen damit die maus erkannt wird sind Com2/ 4800 Baud
Danke
[Default GPS]
GPS=GGA_VTG
GPS1=GGA_VTG
GPS2=RMC_GGA
[GGA_VTG]
Type=NMEA
Name=GPS with GGA and VTG messages
Device=SerialPort
Input1=GPGGA,utctime,latitude,ns,longitude,ew,quality,satellites,hdop,altitude,,,,,
Input2=GPVTG,course,,,,,,speed,
[RMC_GGA]
Type=NMEA
Name=GPS with RMC and GGA messages
Device=SerialPort
Input1=GPRMC,utctime,,latitude,ns,longitude,ew,speed,course,,,,,
Input2=GPGGA,,,,,,quality,satellites,hdop,altitude,,,,,
speedMultiplier=1.851998
speedOffset=0.0
[SerialPort]
Port=2
Timeout=5
Baud Rate=4800
Byte size=8
Parity=N
StopBits=1
Binary mode, no EOF check=0
Enable parity checking=0
CTS output flow control=0
DSR output flow control=0
DTR flow control type=handshake
DSR sensitivity=0
Enable error replacement=0
Enable null stripping=0
RTS flow control=handshake
Abort reads/writes on error=0
XOFF continues Tx=0
XON/XOFF out flow control=0
XON/XOFF in flow control=0
Transmit XON threshold=0
Transmit XOFF threshold=0
Tx and Rx XON character=0
Tx and Rx XOFF character=0
Error replacement character=0
End of input character=0
Received event character=0
[SerialPort Detection]