Beiträge von AVL

Zitat von Ralf25

Why not? :smt017 This tool is to check and format properly your MMC-/SD-Card.

Ralf25, your program SDFormatter V2.0 is very good and sucsessful format all cards, but my 470T is very bad
Can ewerybady test your PNA by "FLASH TEST"?
What you see on the screen duering the test?
And today i can test new cardrider.

Zitat von SkyHammEr

Hello AVL,

you should use a sd card as small as possible. in my case i use a card mmc 32MB ( Nokia handy ). even if the card works in the navi propably there might be difficulties when you use this card for flashing the rom.

so if you have a smaller card (max 128MB) you should try this again with the small card..

please copy the two files in turn one after the other and then it should go..

i do not think your memory is broken, because your navi runs propably before you tried to flash..

Alles anzeigen

Danke, SkyHammEr. Today i use card by 128 and 16!!! Mb.
128Mb my devise not see (say can not find WINCEIMG.CKS)
16MB - Cheksum Error.
And.... before my experiment with WINCE updait, my GPS navigator work wery-wery bad. In my apinion, my flash-chip is broken, bekoise funktion "Test memory" does not work correct.

Zitat von Ralf25

My suggestion is still the same, as GoPalFreak just wrote before, too: use another SD-Card < 1 GB, surely formatted in FAT/FAT16. If you're not sure, use this tool by Panasonic: SD-Formatter.

I feel pretty confident, that this is not a problem with your PNA.

Danke, but this soft (SDFormatter V2.0) noes not help in my problem.
I have - Cheksum Error.

Zitat von GoPalFreak

Hello AVL,

in first I would try another SD Card!
The best Card for flashing the device should be an "old one" with at least 128MB/512MB !

Another way would be to try another Cardreader...

Important is that you should first copy the .bin file to the SD and then after the transfer is complete copy the .cks file!

Alles anzeigen

Ok.
I use 256Mb card includet with GPS navigator.

When i go in the meny "Other Tools" - "1= Memory Test", test not work. I see string on LCD - "Starting address test" and that is all
This is not normal? May-by my memory is wrong?

I find in device Flash memory Samsung K9F2G08U0A.
I make hot air for this memory.
I try to write program for device by USB.
But i resive Checksum Error.
If I chenge K9F2G08U0A by new K9F2G08U0A in device, may-by device hawe good dovnload by USB?

When i go in the meny "Other Tools" - "1= Memory Test", test not work. I see string on LCD - "Starting address test" and that is all

Also Checksum Error via transmit by USB.

Test is OK:
=============== USB Receive Test ==============
0 1 2 3 4 5 6 7 8 9 a b c d e f
10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
0 1 2 3 4 5 6 7 8 9 a b c d e f
10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
===================================

That is fatal?
Or I have anather vay?

Yes, my bios have all this poin as in the foto.
I try USB solution.

Zitat von Ralf25

Very strange! And you're sure that you did a FAT/FAT16 format? Are you able to try another card or cardreader?

Yes, am sure that i do FAT/FAT16 format.
I dont TRY NEW CARD RIDER and NEW CARD. I try and write for you.
Danke.

Yes, i try R22 and R23.
PNA470T_P4410_FlashRom_R22
PNA470T_P4410_FlashRom_R23
Resultat - Cheksum Error.
Also when i go to the MEMORY TEST option, test stop in point "Starting address test".
Devise dasenot switch On now :(.

Hi, all!
I have problem.
Medion MDPNA 470T MD96080 FlashROM Upgrade. Cheksum Error.

I doo:
Format SD card 256 MB FAT16.
Copy files: WINCEIMG.BIN und WINCEIMG.CKS to the card.
Press 2 battons.
0 = FlashRom Upgrade
2=WinCE by SD/MMC
then i see:
MounDisk Seccess.
Open CEImage 0-----100%
CHECKSUM Error!!!

What can i doo?
Help my, plz.