smartctl 5.40 2010-04-30 r3100 [i686-pc-mingw32-vista-sp2] (cf-win32-20100501) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 series Device Model: ST9500325AS Serial Number: 5VE090QP Firmware Version: 0001SDM1 User Capacity: 500.107.862.016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Jul 11 11:28:43 2010 MS SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 86) The previous self-test completed having the electrical element of the test failed. Total time to complete Offline data collection: ( 678) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 139) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_ VALUE 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 41839341 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1612 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 17381457671 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7383 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1575 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 195 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 056 041 045 Old_age Always In_the_past 44 (0 15 44 24) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 271 193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 45496 194 Temperature_Celsius 0x0022 044 059 000 Old_age Always - 44 (0 9 0 0) 195 Hardware_ECC_Recovered 0x001a 041 039 000 Old_age Always - 41839341 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 178 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 178 occurred at disk power-on lifetime: 7245 hours (301 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 00:19:36.389 READ FPDMA QUEUED 2f 00 01 10 00 00 40 00 00:19:36.255 READ LOG EXT 60 00 00 ff ff ff 4f 00 00:19:33.583 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 00:19:33.582 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 00:19:33.576 READ FPDMA QUEUED Error 177 occurred at disk power-on lifetime: 7245 hours (301 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 00:19:33.583 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 00:19:33.582 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 00:19:33.576 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 00:19:33.575 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 00:19:33.569 READ FPDMA QUEUED Error 176 occurred at disk power-on lifetime: 7209 hours (300 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7c d5 ff 0a Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 40 d5 ff 4a 00 00:01:42.103 READ FPDMA QUEUED 2f 00 01 10 00 00 40 00 00:01:42.060 READ LOG EXT 60 00 00 40 d5 ff 4a 00 00:01:39.559 READ FPDMA QUEUED 2f 00 01 10 00 00 40 00 00:01:39.442 READ LOG EXT 61 00 08 f8 07 9e 41 00 00:01:36.965 WRITE FPDMA QUEUED Error 175 occurred at disk power-on lifetime: 7209 hours (300 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7c d5 ff 0a Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 40 d5 ff 4a 00 00:01:39.559 READ FPDMA QUEUED 2f 00 01 10 00 00 40 00 00:01:39.442 READ LOG EXT 61 00 08 f8 07 9e 41 00 00:01:36.965 WRITE FPDMA QUEUED 60 00 00 40 d5 ff 4a 00 00:01:36.964 READ FPDMA QUEUED 61 00 08 08 08 9e 41 00 00:01:36.963 WRITE FPDMA QUEUED Error 174 occurred at disk power-on lifetime: 7209 hours (300 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7c d5 ff 0a Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 08 f8 07 9e 41 00 00:01:36.965 WRITE FPDMA QUEUED 60 00 00 40 d5 ff 4a 00 00:01:36.964 READ FPDMA QUEUED 61 00 08 08 08 9e 41 00 00:01:36.963 WRITE FPDMA QUEUED 2f 00 01 10 00 00 40 00 00:01:36.909 READ LOG EXT 60 00 40 ff ff ff 4f 00 00:01:34.421 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_ Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: electrical failure 60% 7381 0 # 2 Short offline Completed: electrical failure 90% 7338 0 # 3 Extended offline Completed: electrical failure 90% 7337 0 # 4 Conveyance offline Completed: electrical failure 90% 7337 0 # 5 Extended offline Completed: electrical failure 90% 7337 0 # 6 Short offline Completed: electrical failure 90% 7297 0 # 7 Extended offline Completed: electrical failure 90% 7295 0 # 8 Short offline Completed: electrical failure 90% 7295 0 # 9 Short offline Completed: electrical failure 90% 7294 0 #10 Short offline Completed without error 00% 3849 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.